Zytel ® HTN
#HTN51G35HSL & #HTNFR51G35L UL Card.
High Temperature Nylon Resin
Aliphatic-aromatic polyamide, high melting point (300oC,
572oF), much higher than nylon 66 or PET. Ideal for applications involving short-term and
high temperatures. Low thermal expansion minimizes final product stress while high temp
resistance affords an ample safety margin.
(Expected UL 1446 Insulation Systems Classes B,
F & H)
Zytel ®
#70G33L& #101, #101L UL Card
Nylon Resin
Available in unreinforced and glass reinforced, including 6,
66 and 612, used in transformers, relays, motors and other coil-form-based electrical
components requiring toughness, good elongation and good pin retention capability. Glass
reinforcement enhances strength and molding tolerances.
(66 listed in UL 1446 Insulation
Systems Classes B & F).
Rynite ® PET
FR530 & FR503L UL Card
Thermoplastic Polyester Resin
Polyethylene terephthalate polyester maintains constant
uniformity with predictable shrinkage; +- 0.00025
in tolerances reflect stability. Ideal for small complex electrical and electronic
components.
(UL 1446 Insulation Systems Classes B, F, H & N).
Crastin ® PBT
SK601, SK652, SK655, &
CE7030UL Card
Thermoplastic Polyester Resin
Polbutylene terephalate polyesters have excellent
processability and uses in connectors, coil forms and other electrical components.
(Rated
in UL 1446 Insulation Systems Classes B & F).
Zenite LCP
#6130 , & #7130 UL Card.
Liquid crystal
polymer resin
Aromatic polyester, high melt points: 335-352oC,
635-666oF, Superior dimensional stability and creep resistance. Processability allows
molding coil forms with 0.25 mm (10 mil) thick flanges.
(UL 1446 Insulation Systems
Classes B, F, H, N, & R).
 Back to Main Page
If you have questions or comments, contact us  at market@pleo.com
 ® is P. Leo & Co., Ltd. trade mark.
Zytel® Rynite® Crastin ® Zenite ® Mylar® Kapton ® and Nomex® are Du Pont resigtered trade marks.
© P. LEO 1997-2008
| 
®
Recognized Molder (QMMY2)