UL iQ™

Electrical Insulation System Component		E200050
P LEO & CO LTD
4TH FL, UNIT 20-21 GOLDFIELD INDUSTRIAL CENTRE FO TAN, 1 SUI WO RD SHATIN N T HK
System Component	System Designation	System Temp (Class)
1K063, 1K220, 1K63A, 1K7170, 1K7177, 1N008, 1N020, 1N030, 1N155, A###HA, A###M&, A###MA, N###K&, N###KN&, N###M&, N###MN&	N91	200(N)
report date: 2015-06-24	© 2016 UL LLC

Authorization Letter Required for Adoption of this System

Construction Details (Table I)

The use of this insulation system is limited to the combination of materials specified below. Where more than one item is designated under Insulation Function, they may be used together, unless otherwise indicated, or they may be used as alternates to one another. Functions designated "optional" are not necessarily required for every design. Insulation thicknesses and/or layers indicated below are minimum.

Winding Wire

- Recognized Component - Magnet wire (OBMW2), single build or greater, round or rectangular, copper or aluminum unless stated otherwise for the types listed below
- Recognized Component - Single and Multi-Layer Insulated Winding Wire (OBJT2) listed below
- Recognized Component - Appliance Wiring Material (AVLV2) listed below
- Bare conductors wrapped or interleaved with a paper or film listed below need not be a Recognized Component

(unless otherwise noted, winding wire types listed below may be used in combination within a single product)

ANSI Type		Temp(°C)	Basecoat(Topcoat)
MW 35	or	200	Polyester-amide-imide (Polyamide-imide)
MW 35-A	or	220	Polyester-amide-imide (Polyamide-imide)
MW 36	or	200	Polyester-amide-imide (Polyamide-imide)
MW 36-A	or	220	Polyester (Polyamide-imide)
MW 37	or	220	Polyester (Polyamide-imide)
MW 38	or	220	Polyester (Polyamide-imide)
MW 73	or	200	Polyester-amide-imide (Polyamide-imide)
MW 73-A	or	220	Polyester-amide-imide (Polyamide-imide)
MW 74	or	200	Polyester-amide-imide
MW 74-A	or	220	Polyester-amide-imide

Designation	mils(mm)	comments
Jiangsu Jiangyin Qian Li - NonRecognized Component
AWM Style 3122
P. Leo - NonRecognized Component
AWM 3122

Ground & Interwinding Insulations - Recognized Component

Designation	mils(mm)	comments
CELANESE INTERNATIONAL CORP [E344082]
ZENITE 6130(+)	15 (0.38)
ZENITE 7130	15 (0.38)
CHANGSHU ZHONGXUN SPACE FLIGHT INSULATING MATERIALS CO LTD [E305246]
HTPI	1 (0.03)
E I DUPONT DE NEMOURS & CO INC [E34739]
Nomex® 410	4 (0.1)
Nomex® 411	9 (0.23)
Nomex® 414	4 (0.1)
Nomex® 416, 416 LAM	4 (0.1)
Nomex® 418, 818, 864LAM	4 (0.1)
Nomex® 464, 464 LAM	4 (0.1)
Nomex® 992, 992PSB	8 (0.2)
Nomex® 993, 993PSB	7 (0.18)
Nomex® 994, 994PSB	7 (0.18)
E I DUPONT DE NEMOURS & CO INC [E39505]
Kapton® 100H, 100HN, 100HN-S, 100H-ZT, 100HN-ZT, 100FPC-ZT, 100TAB-ZT, 100PST, 100HA, 100TN, 100V, 100VN, 100FPC, 100FPC-A, 100HPP-ST	1 (0.03)
E I DUPONT DE NEMOURS & CO INC [E41938]
Rynite FR530(l)(+)(f1), FR530L(l)(+)(f1)	15 (0.38)
P LEO & CO LTD [E126174]
1K063	1 (0.03)
1K220	1 (0.03)
1K63A	1 (0.03)
1K7170	1 [layers]
1K7177	1 [layers]
1N008	4 [layers]
1N012	4 [layers]
1N020	4 (0.1)
1N030	4 (0.1)
1N155	4 (0.1)
SRO ARAMID(JIANGSU)CO LTD [E320646]
X-Fiper X630, X610, X612, 316, X630H, 611, X-730,N-756, AR 30, Ar 20, AR 50, N758,X625, X656, X628, X883, X885, X930, X980, AD 30, X992, X993, X994	4 (0.1)

Non-Recognized Ground & Interwinding Insulations

Designation	mils(mm)	comments
E. I. Dupont de Nemours & Co.
Kapton HN	1 (0.03)
Nomex® E56A	6 (0.15)
P. Leo
A###HA	2-X-2	where A### indicates SRO Aramid Paper grades X630 or equivalent grades at 0.10 minimum total thickness. * represents each layer thickness in mils. &* containing total minimum thickness of Nomex in mils.where A### indicates SRO Aramid Paper grades X630 or X610 or X612 or 316 at 0.10 minimum total thickness
A###M*&	4 (0.1)	where A### indicates SRO Aramid Paper grades X630 or equivalent grades at 0.10 minimum total thickness. * represents each layer thickness in mils. &* containing total minimum thickness of Nomex in mils.
A###MA	2-X-2	where A### indicates SRO Aramid Paper grades X630 or equivalent grades at 0.10 minimum total thickness. * represents each layer thickness in mils. &* containing total minimum thickness of Nomex in mils.where A### indicates SRO Aramid Paper grades X630 or X610 or X612 or 316 at 0.10 minimum total thickness
N###K*&		where N### indicates Dupont Nomex 410 or 464 or 416 or equivalent det 0.10 mm minimum total thickness, or Nomex 411 at 0.23 mm minimum total thickness. * represents each layer thickness in mils. &* containing total minimum thickness of Nomex in mils.
N###KN*&		where N### indicates Dupont Nomex 410 or 464 or 416 or equivalent det 0.10 mm minimum total thickness, or Nomex 411 at 0.23 mm minimum total thickness. * represents each layer thickness in mils. &* containing total minimum thickness of Nomex in mils.
N###M*&		where N### indicates Dupont Nomex 410 or 464 or 416 or equivalent det 0.10 mm minimum total thickness, or Nomex 411 at 0.23 mm minimum total thickness. * represents each layer thickness in mils. &* containing total minimum thickness of Nomex in mils.Nomex/Mylar in which Nomex 410, 414, 416, 418 or 464 has a minimum overall thickness of 4.0 mils
N###MN&		where N### indicates Dupont Nomex 410 or 464 or 416 or equivalent designations at 0.10 mm minimum total thickness, or Nomex 411 at 0.23 mm minimum total thickness. * represents each layer thickness in mils. &* containing total minimum thickness of No
SM62	10 (0.25)	Silicone Bonded Mica Paper
SRO Aramid (Jiangsu) Co. Ltd
AHA	2-X-2	where A is aramid paper grade X630 or equivalent grades by SRO ARAMID(JIANGSU)CO LTD at 0.10 minimum total thickness
AMA	2-X-2	where A is aramid paper grade X630 or equivalent grades by SRO ARAMID(JIANGSU)CO LTD at 0.10 minimum total thickness

Lead Wires

(optional)

180 silicone rubber wtih or without glass braid + +

200 FEP - copolymer of tetrafluoroethylene and Hexafluoropropylene

200 PTFE - polytetrafluoroethylene

200 SI - silicone rubber - with or without glass braid

200 SI - silicone rubber with or without polyester braid

+ To be isolated from direct contact with windings (magnet wire) by any insulating material (tape, layer insulation, sleeving,etc.) listed in this table - unless specifically excluded from this requirement by a special note at the beginning of this table.

Any sheet insulation or tape described in this table with no minimum thickness requirement may be used as a Minor Sheet Material

Minor Sheet Materials

(optional)

layer, outer, wrap etc.

Designation (no.)	comments
Hubei Pingan Electric Material
Mica
PB5161
Huizhou Mica Electric Material Co Ltd
HM-X-Y(Z)
SRO Aramid (Jiangsu)
Aramid board
X611
Teijin Dupont
Q51
Tongcheng Zhongtian Mica Products
Mica PM9820
Vitar Insulation Mfrs Ltd
M928

Cores, Tubes, Bobbins

(optional)

for mechanical support only

Designation (no.)	comments
E. I. Dupont de Nemours & Co.
Rynite FR530L
Sumitomo Bakelite
PM-9630
PM-9820

Tapes - Listed or Recognized Component

tapes are optional for this system

Designation	comments
3M COMPANY [E17385]
1205
27 (a)
60
63
69 (a)
79
79-FR
92
P LEO & CO LTD [E126174]
1K125
1K220
1K22A
1K7170
1K7177
1KPST
1N008
1N012
1P130 (b)
1P801
1P802
1P802B
1P830
1P9FR (a)

Non-Recognized Tapes

tapes are optional for this system

Designation	comments
3M (Minnesota Mining & Mfg Co)
11	thermosetting rubber adhesive, black acetate cloth
1276
1554
P Leo & Co Ltd
0L02
0L05
1H632
1H633
1K550
1N632
1P800
1P808
1PETS
IN633

Any material described in this table with no thickness requirement may be used as a Spacer or a Wedge

Spacers & Wedges

spacers and wedges are optional for this system

Designation	comments
AMP
172074-1
280232
85091-1
Glastic Corp.
1412
1603GA
FHT
MTS
SG-200
Korea Electric Terminal Co Ltd
MG-630823
P. Leo
PB-2
TP5013
Qingdao Ouxiang Electronics Co Ltd
630823
Wenzhou Zhucheng Electrical Co Ltd
HF-25011J-1Y
HP25039K-2F
Yueqing City Nibeilai Electrionics Co Ltd
172074-1
MG-630823-0

Sleevings

(optional)

Designation (no.)	comments
Foshan Gaoming Kedeyu Insulating Material Co Ltd
KDY05-20
Foshan Silveray Insulating Products Co, Ltd
TRX
Guangdong Foshan City Shunde Qiaocheng Insulation Material Co Ltd
2753-3
Mianyang Hengliyuan Electric Co Ltd
HRS-1U
P. Leo
2R-SG	Silicone-coated fiberglass sleeving
2R-SG-1	Silicone-coated fiberglass sleeving
2R-SG-2	Silicone-coated fiberglass sleeving
2R-SG-3	Silicone-coated fiberglass sleeving
2R-SG-a#, 2R-SG-b#, 2R-SG-c#
2T-TFL	PTFE Tubing
2T-TFS	PTFE Tubing
2T-TFT	PTFE Tubing
Shenzhen Woer Heat-Shrinkable Material Co Ltd
RSFR-H

Tie Cords

(optional)

Designation (no.)	comments
A.I.M. Inc.
AT-EGF
AT-GF
AT-PF
AT-PG
AT-SGF
AT-UW
Shanghai Huawei Plastic Co Ltd
HWTC
Various Manufacturers
Fiberglass, untreated

Varnishes - Recognized Component

varnishes are optional for this system

Designation	comments
ELANTAS ZHUHAI CO LTD [E314793]
50 (e), 50S (e), 50SM (e), 50VT (e), 50VTC (e), 5180 (e), 5183 (e), 5183SW, ELAN-Dur 822A01, CORONA-Protect 828A01

Miscellaneous Minor Insulations

(optional)

Designation (no.)	comments
Qingdao Qinke Engineering Plastics Co Ltd
301-G15