System Component, Electrical Insulation - Component E200050  
P.LEO & CO. LTD.
4TH FL, UNIT 20-21 GOLDFIELD INDUSTRIAL CENTRE FO TAN, 1 SUI WO RD SHATIN N.T. HK
System
Component
System
Designation
System
Temp(Class)
1P9FR, 1A025, 1PEN2, 1H86A, 1PN2R, 1PEN3, 1PN3R, 1H86R, 0L50, 0L55, 2T-TFT.xx, 2T-TFL.xx, Fiberglas 2R-YG, Silicone Coated Fiberglas 2R-SG, 2T-TFS.xx, 1P801, 1P802, 1PN2R, 1PN3R, RP65, SM61, SR315T, SR853T, 1G006, 1G015, 1G027, 1P130, 1H860, 1PG880, 1H850, 1PK825, 1PN820, 1PN828, 1G130, 1G155, 1G180, 1K7170, 1K7177, 1K7270, 1P700, 1P702, 1P705, 1P703, 1P707, 1P717, 1P751, 1P808, 1P800, 1P801, 1P802, 1H861, 1H862, 1H863, 1P350, 1P830, 1N008, 1H818, 1H866, 1P833, 1K7172, 1H868, 1G200, 1P701, 1K063CR, 1K7171CR N86 200(N)
Underwriters Laboratories Inc.


Construction Details (Table I)  

The use of this insulation system is limited to the combination of materials specified below. Where more than one item is designated under Insulation Function, they may be used together, unless otherwise indicated, or they may be used as alternates to one another. Functions designated "optional" are not necessarily required for every design. Insulation thicknesses and/or layers indicated below are minimum.
Note: Specific Magnet Wire Insulations called out in this table must be isolated from direct contact with windings by any Ground or Phase insulation.
  Winding Wire - Recognized Component - Magnet wire (OBMW2), single build or greater, round or rectangular, copper or aluminum unless stated otherwise for the types listed below
- Recognized Component - Single and Multi-Layer Insulated Winding Wire (OBJT2) listed below
- Recognized Component - Appliance Wiring Material (AVLV2) listed below
- Bare conductors wrapped or interleaved with a paper or film listed below need not be a Recognized Component
(unless otherwise noted, winding wire types listed below may be used in combination within a single product)
MW 35 or 200C Polyester-amide-imide (Polyamide-imide)
MW 36 or 200C Polyester-amide-imide (Polyamide-imide)
MW 73 or 200C Polyester-amide-imide (Polyamide-imide)
MW 74 or 200C Polyester-amide-imide
Bare Conductor - wrapped with any Nomex Ground in this Table 2mils(0.051mm) min.

Han Kyung
     HK SW-2A15 mils (0.38 mm) Recognized Appliance Wiring Material (AVLV2), silicone rubber rated 200C, must be isolated from direct contact with windings by any Ground or phase ,Packaging must show Cat. No.
Nikkan Industries
     WP-60-10S, WPT-60-10Ssilicone rubber (0.60mm) w/ silicone impregnated braiding (0.15mm)
Nissei Electric Co.
     RSU-Tsilicone rubber (0.70mm) w/ silicone impregnated braiding (0.15mm)
Yung Chang Silicone Co.
     Y-SRPWsilicone rubber (0.65mm) w/ silicone impregnated braiding (0.2mm)
Ground & Interwinding Insulations
     Designation (no.)mils(mm)comments
Dupont Teijin Films
     Kaladex PEN 2000 Prefixed with "N" representng: laminated Nomex 410, 416 -5 mils, 411 -10 mils, 418 -7mils, E56, E56A, 419 -7mils minimum.
E. I. Dupont de Nemours & Co.
     Nomex® 4105 (0.13)aramid insulating paper
     Nomex® 41110 (0.25)aramid insulating paper
     Nomex® 4143 (0.08)aramid insulating paper
     Nomex® 4163 (0.08)aramid insulating paper
     Nomex® 4197 (0.18)aramid insulating paper
     Nomex® 4643 (0.08)aramid insulating paper
     Nomex® 99263 (1.6)aramid insulating paper
     Nomex® 99340 (1.02)aramid insulating paper
     Nomex® 994, 994 NPT40 (1.02)aramid insulating paper
     Nomex® E567 (0.18)aramid insulating paper
P. Leo
     1P801Recognized Component - Insulating Tape (OANZ2) Prefixed with "N" representng: laminated Nomex 410, 414, 416, 464 -5 mils, 411 -10 mils, 418 -7mils, E56, E56A, 419 -7mils minimum.
     1P802Recognized Component - Insulating Tape (OANZ2) Prefixed with "N" representng: laminated Nomex 410, 414, 416, 464 -5 mils, 411 -10 mils, 418 -7mils, E56, E56A, 419 -7mils minimum.
     1PN2RRecognized Component - Insulating Tape (OANZ2) Prefixed with "N" representng: laminated Nomex 410, 414, 416, 464 -5 mils, 411 -10 mils, 418 -7mils, E56, E56A, 419 -7mils minimum.
     1PN3RRecognized Component - Insulating Tape (OANZ2) Prefixed with "N" representng: laminated Nomex 410, 414, 416, 464 -5 mils, 411 -10 mils, 418 -7mils, E56, E56A, 419 -7mils minimum.
Lead Wires(optional)
200 FEP - florinated ethylene propylene
200 PTFE - polytetrafluoroethylene
200 SI - silicone rubber - with or without glass braid

Minor Sheet Insulations(optional)layer, outer, wrap etc.
Any sheet insulation or tape described in this table with no minimum thickness requirement.
     Designation (no.)comments
3M
     CeQuin 3000
     TufQuin 100, 110, 120
E. I. Dupont de Nemours & Co.
     Kapton
     Kapton CR
     Kapton HN
     Nomex 410
     Nomex 411
     Nomex 414
     Nomex 416
     Nomex 418
     Nomex 464
     Nomex 992
     Nomex 993
     Nomex E56
     Nomex E56A
     Nomex N196
P. Leo
     RP65
     SM61
     SR315T
     SR853T
Cores, Tubes Bobbins(optional)for mechanical support only
     Designation (no.)comments
E. I. Dupont de Nemours & Co.
     Rynite FR530
     Rynite FR530L
Sumitomo Bakelite
     PM-9630
     PM-9820
Tapes(optional)
     Designation (no.)comments
Daeil
     127polyester film
Hyupsung
     Korta 210
P.LEO & CO. LTD.
     0L50
     0L55
     1A025
     1G006aramid fiber (Nomex) paper
     1G015silicone adhesive, glass cloth
     1G027rubber adhesive, glass cloth
     1G130glass cloth
     1G155glass cloth
     1G180glass cloth
     1G200woven glass cloth, silicone adhesive
     1H818reinforced PET, rubber adhesive
     1H850polyester film
     1H860acrylic adhesive, polyester film
     1H861acrylic adhesive, polyester film
     1H862acrylic adhesive, polyester film
     1H863acrylic adhesive, polyester film
     1H866PET film with nonwoven polyester reinforcement fibers, acrylic adhesive
     1H868reinforced PET, acrylic adhesive
     1H86A
     1H86R
     1K063CR
     1K7170Kapton film
     1K7171CR
     1K7172silicone adhesive, polyimide film
     1K7177Kapton film
     1K7270Kapton film
     1N008Aramid fiber (Nomex), Acrylic Adhesive
     1P130acrylic adhesive, polyester film
     1P350PET film, acrylic adhesive
     1P700polyester film
     1P701polyester film
     1P702polyester film
     1P703polyester film
     1P705polyester film
     1P707polyester film
     1P717polyester film
     1P751polyester film
     1P800polyester film
     1P801acrylic adhesive, polyester film
     1P802acrylic adhesive, polyester film
     1P808polyester film
     1P830acrylic adhesive, polyester film
     1P833PET film, acrylic adhesive
     1P9FR
     1PEN2
     1PEN3
     1PG880polyester film glass laminate
     1PK825polyester knit
     1PN2R
     1PN3R
     1PN820woven polyester cloth
     1PN828woven polyester cloth
   
Spacers and Wedges(optional)
 
     Designation (no.)comments
Glastic Corp.
     1312
     1911
     FHT
     MTS rod
     SG-200
     SG-200 rod
     TSFpolyester/glass
K.E.T.
     MG-630823
Sung Won
     SK641
     SK661
Sleevings(optional)
     Designation (no.)comments
P. Leo
     2T-TFL.xxteflon tube
     2T-TFS.xxteflon tube
     2T-TFT.xxteflon tube
     Fiberglas 2R-YG
     Silicone Coated Fiberglas 2R-SG
Varflex
     Varglas Non-Fray Type H
     Varglas Non-Fray Type HO
     Varglas Non-Fray Type HP
     Varglas Silicone Resin 500 H-A-1
     Varglas Viton 231 H-A-1
     Varglas Viton 231 H-C-1
     Silicone Resin 500 H-B-1
     Silicone Resin 500 H-C-1
     Silicone Resin 500 H-C-2
     Silicone Rubber ES 4400 H-A-1
     Silicone Rubber ES 4400 H-B-1
     Silicone Rubber ES 4400 H-C-1
     Silicone Rubber H-A-1
     Silicone Rubber H-B-1
     Silicone Rubber H-C-1
Tie Cords(optional)
     Designation (no.)comments
Teijin
     Polyester
Toray
     Polyester
Various Manufacturers
     Fiberglass, untreated
Western Filament
     24/140
     50DOF17W
     DHS-1CL
     DRT-45CL
     DRT-45X
VarnishesRecognized Component - Varnishes (OBOR2)
     Designation (no.)comments
E-Weon Chemtech Co., Ltd.
     TSHP not valid for use with Nissei wires.
     TSHP-F not valid for use with Nissei wires.
Elantas Beck GmbH
     FT-2004 for use only with ANSI Type MW35 magnet, Han Kyung wires or a Nomex wrapped bare conductor.
Elantas Electrical Insulation Elantas Pdg Inc
     468-2(x)(x) - May be preceeded by prefix "E" and may be followed by a one to five alphanumeric suffix indicating percent of inert fillerand/or color. for use only with a Nomex wrapped bare conductor.
     50(+3), 50S(+3), 50SM(+3), 50VT(+3), 50VTC(+3), 5180(+3), 5183(+3), 5183SW, ELAN-Dur 822A01(+3) - May be followed by XXF. Where XX designates level of inorganic filler and letter F or filler.
Kyocera Chemical Corp. (Toshiba Chemical)
     TVB-2166 for use only with ANSI Type MW35 magnet, Young Chan or Han Kyung wires or a Nomex wrapped bare conductor.
Noroo Paint & Coating Co. Ltd
     DVB-2152(#)(#) may be filled with 0-30% silica. for use only with ANSI Type MW35 magnet, Young Chan or Han Kyung wires or a Nomex wrapped bare conductor.