P. LEO UL Recognized Electrical Insulation Systems
When designing your transformer and/or motor that requires using the Electrical Insulation Systems (EIS), P. LEO can help you to achieve this. We are offering the transformer and motor industry with our own UL Electrical Insulation Systems that have been preapproved by Underwriters Laboratories and are recognized to IEC standards.
Your company can benefit from our EIS by saving yourself time and cost in adopting your own systems. Because in order to meet the required standards in adopting the final UL recognition, a year or two of intense testing is necessary. In addition, you will have to invest an access of US$40,000 in the process. Our systems have already gained the recognitions from UL and are ready to go in your application.
How to select the Right UL Electrical Insulation System ?
In choosing the right electrical insulation system, we have outlined the key steps and decision areas below :
1.. Decide if your transformer and/or motor needs an EIS.
2.. Determine which "class" of systems recognition your product requires. EIS classes are based on the maximum "hot spot" in the system. Your choices are Class B (130oC), Class F (155oC), Class H (180oC), Class N (200oC), and Class R (220oC).
3.. Decide if your application requires an Electrical Insulation System for use in an "open to the atmosphere" application such as a transformer, relay, contactor, and most motors, please check what ground insulation you will use.
4.. Check the System designation at our website http://www.hk.pleo.com/OBJS2/OBJS2.htm , Please check any ground insulation and magnet wire you will use. P.Leo tapes are ground insulation materials available in most of our UL Electrical Insulation System.
5.. Check on the varnish, if any, you would like to use. You can access the information on our materials list that shows you all the minor insulation materials, e.g. "Coil Bobbins, Wires, Varnishes, Resins, Sleeving & tube etc.
6.. To receive authorization for our Electrical Insulation System, simply send us an e-mail at market@pleo.com requesting authorization. We will write a letter to you with a copy to your UL agents.
7.. Send your an OBJY2 application letter to UL with our authorization letter to adopt our Electrical Insulation System.
|
|
|
|
Back to Main Page |
Go to UL SYSTEM |
® Registered trademark of Underwriters Laboratories, Inc.
Copyright © 1996-2003 P. Leo & Co., Ltd. All rights reserved. Reproduction in whole or in part in any form or medium without express written permission of P. Leo & Co., Ltd. is prohibited.
BCwire ; pBobbin ; BCmica; BCtube
are trademarks of P. Leo & Co.(B.C.), Ltd.