System Component, Electrical Insulation - Component E200050  
P.LEO & CO. LTD.
4TH FL, UNIT 20-21 GOLDFIELD INDUSTRIAL CENTRE FO TAN, 1 SUI WO RD SHATIN N.T. HK
System
Component		 System
Designation		 System
Temp(Class)
NMN-E, NTN, DM**, 1N1008, N###MN, N###PEN/N, N###PEN/MICA, SM61 MICA, RP65 MICA, SM62 MICA, 8M81 MICA, 8M82 MICA, 1A025, 1H86A, 1H86R, 0L50, 0L55, TP-####, TK-####, DPD###, 1N012, 1G006, 1G015, 1G027, 1P130, 1H860, 1K063, 1H850, 1G130, 1G155, 1G180, 1K7170, 1K7177, 1K7270, 1P700, 1P702, 1P705, 1P703, 1P707, 1P717, 1P751, 1P808, 1P800, 1P801, 1P802, 1K7171, 1P350, 1P830, 1N155, 1P133, 1P135, 1H818, 1H866, 1P833, 1K7172, 1P701, 1K063CR, 1K7171CR, PB-2, N###/1P801(**), N###/1P802(**), N###/1PEN2(**), N###/1PN2R(**), N###MICA**(%), N###/1K7171(**), N###/1N012(**), N###/N155(**), OL50/N###OL50(**), N###/OL50(**), N###MN*&*, N###PEN/N*&*, N###/PEN*&*, N###/PEN2500*&*, N###/K/N*&*, PEN/N411/M/N*&*, N###MICA*&*(%), D/PEN**, L/PEN/L** R82 220(R)
Underwriters Laboratories Inc.

Construction Details (Table I)  

The use of this insulation system is limited to the combination of materials specified below. Where more than one item is designated under Insulation Function, they may be used together, unless otherwise indicated, or they may be used as alternates to one another. Functions designated "optional" are not necessarily required for every design. Insulation thicknesses and/or layers indicated below are minimum.
Note: AWM Style 3367 or Style 3122 manufactured by Han Kyung Co. should be isolated from direct contact with winding (magnet wire) by any ground insulation listed in the table.
  Winding Wire - Recognized Component - Magnet wire (OBMW2), single build or greater, round or rectangular, copper or aluminum unless stated otherwise for the types listed below
- Recognized Component - Single and Multi-Layer Insulated Winding Wire (OBJT2) listed below
- Recognized Component - Appliance Wiring Material (AVLV2) listed below
- Bare conductors wrapped or interleaved with a paper or film listed below need not be a Recognized Component
(unless otherwise noted, winding wire types listed below may be used in combination within a single product)
MW 16 or 220C Polyimide
MW 35A or 220C Polyester-amide-imide (Polyamide-imide)

Han Kyung
     AWM Style 3122Recognized Component Appliance Wiring Material, polyester basecoat with polyamide-imide topcoat, rated 220C
     AWM Style 3367Recognized Component Appliance Wiring Material, polyester basecoate with polyamide-imde topcoat, rated 220C
     HK SW-2ARecognized Appliance Wiring Material (AVLV2), silicone rubber rated 200C, must be isolated from direct contact with windings by any Ground or phase ,Packaging must show Cat. No.
     HK-SW-2BRecognized Appliance Wiring Material (AVLV2), silicone rubber rated 200C, must be isolated from direct contact with windings by any Ground or phase ,Packaging must show Cat. No.
Various Manufacturers
     OBMW2, bare conductor wrapped with Item 3D, 0.002 in. mm, 50% overlap
     OBMW2, polyester basecoat with polyamide-imide topcoat, copper only, rated 220C
Yung Chang Silicone Co.
     AWM Style 3132constructed with R/C polyester basecoat with polyamid-imide topcoat, rated 220C
Ground & Interwinding Insulations
     Designation (no.)mils(mm)comments
3M
     CeQuin III10.0 (0.25)
     CeQuin V10.0 (0.25)heat treated unfired ceramic like base rubber bonded paper
     CeQuin VF, FVF, VFV10.0 (0.25)
     CeQuin VG, VGV, GVG10.0 (0.25)
DuPont
     N65010.0 (0.25)
     Nomex 410, 414, 418, 424 or 4255 (0.13)
     Nomex 41111.5 (0.29)0.016 min. thickness
     Nomex 4165 (0.13)0.005 min. thickness
     Nomex 4645 (0.13)
     Nomex 99210.0 (0.25)0.014 min. thickness
     Nomex 993, Nomex 994 or Nomex 994 NPT8.3 (0.21)
     Nomex E56A7.5 (0.19)0.015 min. thickness
Midwest Mica Co.
     MS-5487.5 (0.19)
     MS-5497.5 (0.19)
P. Leo
     N###/1P801(**)5 (0.13)N### represents Nomex 410, 411, 414, 416, 464, 418, 419, E56, E56A. (**) represents total minimum thickness of Nomex: 5 mils for 410, 414, 416, 464 ; 10 mils for Nomex 411, 3 mils for E56, E56A, 419. 1P801 is a UL Recognized Tape (OANZ2) by P Leo.
     N###/1P802(**)5 (0.13)N### represents Nomex 410, 411, 414, 416, 464, 418, 419, E56, E56A. (**) represents total minimum thickness of Nomex: 5 mils for 410, 414, 416, 464 ; 10 mils for Nomex 411, 3 mils for E56, E56A, 419. 1P802 is a UL Recognized Tape (OANZ2) by P Leo.
     N###/1PEN2(**)5 (0.13)N### represents Nomex 410, 411, 414, 416, 464, 418, 419, E56, E56A. (**) represents total minimum thickness of Nomex: 5 mils for 410, 414, 416, 464 ; 10 mils for Nomex 411, 3 mils for E56, E56A, 419. 1PEN2 is a UL Recognized Tape (OANZ2) by P Leo.
     N###/1PN2R(**)5 (0.13)N### represents Nomex 410, 411, 414, 416, 464, 418, 419, E56, E56A. (**) represents total minimum thickness of Nomex: 5 mils for 410, 414, 416, 464 ; 10 mils for Nomex 411, 3 mils for E56, E56A, 419. 1PN2R is a UL Recognized Tape (OANZ2) by P Leo.
     N###MICA**(%)5 (0.13)N### represents Nomex 410, 411, 414, 416, 464, 418, 419, E56, E56A. MICA - Mica Sheet. * - each layer thickness in mils. * - total min thickness of Nomex in mils. % - mica thickness (mm)
     N###MN5 (0.13)N### represents Nomex 410, 411, 414, 416, 464, 418, 419, E56, E56A. (**) represents total minimum thickness of Nomex: 5 mils for 410, 414, 416, 464; 10 mils for Nomex
     N###PEN/MICA5 (0.13)N### represents Nomex 410, 411, 414, 416, 464, 418, 419, E56, E56A. (**) represents total minimum thickness of Nomex: 5 mils for 410, 414, 416, 464; 10 mils for Nomex
     N###PEN/N5 (0.13)N### represents Nomex 410, 411, 414, 416, 418, 419, E56, E56A. (**) represents total minimum thickness of Nomex: 5 mils for 410, 414, 416, 464; 10 mils for Nomex
Von Roll USA Inc. (Acme)
     Micamat7.5 (0.19)
Lead Wires(optional)
200 FEP - florinated ethylene propylene +
200 SI - silicone rubber - with or without glass braid +
200 TFE - tetraflouroethylene +
+ To be isolated from direct contact with windings (magnet wire) by any insulating material (tape, layer insulation, sleeving,etc.) listed in this table - unless specifically excluded from this requirement by a special note at the beginning of this table.
Minor Sheet Insulations(optional)layer, outer, wrap etc.
     Designation (no.)comments
3M
     CeQuin 3000
     CeQuin 30F, 30F30, F30F
     CeQuin 30G, 30G30, G30G
     CeQuin 500
     CeQuin I
     CeQuin IF, IFI, FIF
     CeQuin IG, IGI, GIG
     CeQuin II
     CeQuin X
     CeQuinbord 3000
     CeQuinbord CGA
     CeQuinbord X
     CorQuin
     TufQuin 110, 120
     TufQuin TF, TFT, FTF
Dupont -Teijin Films
     Kaladex
E. I. Dupont de Nemours & Co.
     Kapton
Jia-Xing Insulation
     J-5661-1
P. Leo
     8M81 MICA
     8M82 MICA
     D/PEN**** - thickness of film
     DM*** - represents each layer thickness in mils.
     DMD###### = layer thickness in mils
     DPD###### = layer thickness in mils
     L/PEN/L**** - represents thickness of film
     N###/1K7171(**)N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. 1K7171 is a tape by P. Leo
     N###/1N012(**)N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. 1N012 is a tape by P. Leo
     N###/K/N*&*N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000.
     N###/N155(**)N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. N155 is a tape by P. Leo
     N###/OL50(**)N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. OL50 is UL Recognized under file MH18339
     N###/PEN*&*N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000. PEN is Kaladex film.
     N###/PEN2500*&*N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000. PEN is Kaladex film.
     N###MICA*&*(%)N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000. (%) - mica thickness in (mm)
     N###MN*&*N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000.
     N###PEN/N*&*N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000. PEN is Kaladex film.
     NMN-E
     NTN
     OL50/N###OL50(**)N### indicates Nomex grade 410,411,414,418,416,464,E196,E734,E56, or E56A. (**) - indicates Nomex total thickness in mils. OL50 is UL Recognized under file MH18339
     PB-2
     PEN/N411/M/N*&*N### or N is Nomex 410,411,414,416,464,418,419,E56,E56A. M is Polyester Film. * - represents each layer thickness in mils. & - any thickness of polyester or Kaladex 2000. PEN is Kaladex film.
     RP65 MICA
     SM61 MICA
     SM62 MICA
     TK-##### - represents thickness layer in mils
     TP-##### - represents thickness layer in mils
Sung Won Electric
     SK661
Cores, Tubes Bobbins(optional)for mechanical support only
     Designation (no.)comments
Beijing Chemical Ind. R&D Corp
     301-G30PBT
E. I. Dupont de Nemours & Co.
     FR330
     FR530
     FR530L
L.G. Chemical
     GP2306F
Sabic Innovative Plastics
     420 SEO
Toray
     1401
Wintech Polymer
     2016PBT
     3226PBT
Tapes(optional)
     Designation (no.)comments
Duck Sung Tape Co., Ltd
     DTS-204A
P.LEO & CO. LTD.
     0L50
     0L55
     1A025
     1G006aramid fiber (Nomex) paper
     1G015silicone adhesive, glass cloth
     1G027rubber adhesive, glass cloth
     1G130glass cloth
     1G155glass cloth
     1G180glass cloth
     1H818reinforced PET, rubber adhesive
     1H850polyester film
     1H860acrylic adhesive, polyester film
     1H866PET film with nonwoven polyester reinforcement fibers, acrylic adhesive
     1H86A
     1H86R
     1K063silicone adhesive, polyimide film
     1K063CR
     1K7170Kapton film
     1K7171silicone adhesive, polyimide film
     1K7171CR
     1K7172silicone adhesive, polyimide film
     1K7177Kapton film
     1K7270Kapton film
     1N012Aramid fiber (Nomex), Acrylic Adhesive
     1N1008
     1N155Aramid fiber (Nomex), Acrylic Adhesive
     1P130acrylic adhesive, polyester film
     1P133PET film, acrylic adhesive
     1P135PET film, acrylic adhesive
     1P350PET film, acrylic adhesive
     1P700polyester film
     1P701polyester film
     1P702polyester film
     1P703polyester film
     1P705polyester film
     1P707polyester film
     1P717polyester film
     1P751polyester film
     1P800polyester film
     1P801acrylic adhesive, polyester film
     1P802acrylic adhesive, polyester film
     1P808polyester film
     1P830acrylic adhesive, polyester film
     1P833PET film, acrylic adhesive
     1P9FR
     1PEN2
     1PEN3
     1PENS
     1PETS
     1PG880
     1PG888
     1PN2R
     1PN2S
     1PN3R
     1PN820
     1PN828
   
Spacers and Wedges(optional)
 
     Designation (no.)comments
Donghai Insulation
     660-1F
Jia Xing
     J-5661-1
Jiaxing Enal Electrical Material Co., Ltd.
     EL5121
     EL5221
K.E.T.
     MG-630823
Nihon Nica
     Z611H
P. Leo
     8M81 MICA
     8M82 MICA
Sung Won
     SK661
Sleevings(optional)
     Designation (no.)comments
LG Cable
     GSHS-1625
Young Chan Silicone Co.
     Y-GT
Tie Cords(optional)
     Designation (no.)comments
Various Manufacturers
     Untreated fiberglass
Varnishes(optional)Recognized Component - Varnishes (OBOR2)
     Designation (no.)comments
Elantas Electrical Insulation Elantas Pdg Inc
     468-2(x)(x) - May be preceeded by prefix "E" and may be followed by a one to five alphanumeric suffix indicating percent of inert fillerand/or color.
     50(+3), 50S(+3), 50SM(+3), 50VT(+3), 50VTC(+3), 5180(+3), 5183(+3), 5183SW, ELAN-Dur 822A01(+3) - May be followed by XXF. Where XX designates level of inorganic filler and letter F or filler.
     60-60, 60-60S, 60-60VT, -200, 8180, 8183, 8180HV, 8183HV, 8180LV, 8183LV, 8183SW, 60-65S, -30F, 60-65SLV, ELAN-Dur 822A03