System Component, Electrical Insulation - Component E200050  
P.LEO & CO. LTD.
4TH FL, UNIT 20-21 GOLDFIELD INDUSTRIAL CENTRE FO TAN, 1 SUI WO RD SHATIN N.T. HK
System
Component		 System
Designation		 System
Temp(Class)
1P830, 1N155, 1P833, SM661 N88 200(N)
Underwriters Laboratories Inc.

Construction Details (Table I)  

The use of this insulation system is limited to the combination of materials specified below. Where more than one item is designated under Insulation Function, they may be used together, unless otherwise indicated, or they may be used as alternates to one another. Functions designated "optional" are not necessarily required for every design. Insulation thicknesses and/or layers indicated below are minimum.
Note: Specific Magnet Wire insulations in this table must be isolated from direct contact with windings by any Ground or phase Insulation in this table.
  Winding Wire - Recognized Component - Magnet wire (OBMW2), single build or greater, round or rectangular, copper or aluminum unless stated otherwise for the types listed below
- Recognized Component - Single and Multi-Layer Insulated Winding Wire (OBJT2) listed below
- Recognized Component - Appliance Wiring Material (AVLV2) listed below
- Bare conductors wrapped or interleaved with a paper or film listed below need not be a Recognized Component
(unless otherwise noted, winding wire types listed below may be used in combination within a single product)
MW 35 or 200C Polyester-amide-imide (Polyamide-imide)

Han Kyung
     HK SW-1Recognized Appliance wire with 0.70mm silicone rubber coating and 0.15mm Dow Corning varnish DC6-2230 ipmregnated polyester braiding
Nikkan Industries
     WP-60-10S, WPT-60-10Ssilicone rubber (0.60mm) w/ silicone impregnated braiding (0.15mm)
Nissei Electric Co.
     RSU-Tsilicone rubber (0.70mm) w/ silicone impregnated braiding (0.15mm)
Yung Chang Silicone Co.
     Y-SRPWsilicone rubber (0.65mm) w/ silicone impregnated braiding (0.2mm)
Ground & Interwinding Insulations
     Designation (no.)mils(mm)comments
E. I. Dupont de Nemours & Co.
     Nomex® 4105 (0.13)aramid insulating paper
     Nomex® 41110 (0.25)aramid insulating paper
     Nomex® 4145 (0.13)aramid insulating paper
     Nomex® 4165 (0.13)aramid insulating paper
     Nomex® 41830 (0.76)aramid insulating paper
     Nomex® 4197 (0.18)aramid insulating paper
     Nomex® 4645 (0.13)aramid insulating paper
     Nomex® 99263 (1.6)aramid insulating paper
     Nomex® 99340 (1.02)aramid insulating paper
     Nomex® 994, 994 NPT40 (1.02)aramid insulating paper
     Nomex® E567 (0.18)aramid insulating paper
Lead Wires(optional)
200 SI - silicone rubber - with or without glass braid

Minor Sheet Insulations(optional)layer, outer, wrap etc.
Any sheet insulation or tape described in this table with no minimum thickness requirement.
     Designation (no.)comments
E. I. Dupont de Nemours & Co.
     Nomex
Tapes(optional)
     Designation (no.)comments
Daeil
     127polyester film
Duck Sung Tape Co., Ltd
     DTS-204A
Hyupsung
     Korta 210
P.LEO & CO. LTD.
     1N155Aramid fiber (Nomex), Acrylic Adhesive
     1P830acrylic adhesive, polyester film
     1P833PET film, acrylic adhesive
     SM661
Sung-Won Electric Co Inc
     ANT-155Nomex, adhesive
   
Spacers and Wedges(optional)
 
     Designation (no.)comments
K.E.T.
     MG-630823
Sung Won
     SK641
     SK661
Sleevings(optional)
     Designation (no.)comments
Sung-Won Electric Co Inc
     2MR
     3MR
     5MR
Tie Cords(optional)
     Designation (no.)comments
Various Manufacturers
     Fiberglass, untreated
VarnishesRecognized Component - Varnishes (OBOR2)
     Designation (no.)comments
Dow Corning Corp
     DC-997
E-Weon Chemtech Co., Ltd.
     TSHP
     TSHP-F for use only with ANSI Type MW35 magnet wire or WP-60-10S by Nikkan Industries or RSU-T by Nissei
Noroo Paint & Coating Co. Ltd
     DVB-2152(#)(#) may be filled with 0-30% silica.