System Component, Electrical Insulation - Component
E200050
P.LEO & CO. LTD.
4TH FL, UNIT 20-21 GOLDFIELD INDUSTRIAL CENTRE FO TAN, 1 SUI WO RD SHATIN N.T. HK
System
Component
System
Designation
System
Temp(Class)
1P9FR, 1P350, 1H860, 1G016, 1P9FR, 1A025, 1N012, 1G006, 1G027, 1P130, 1H860, 1K063, 1P350, 1P133, 1P135, 1H818, 1H866
F89
155(F)
Underwriters Laboratories Inc.
Construction Details
(Table I)
The use of this insulation system is limited to the combination of materials specified below. Where more than one item is designated under Insulation Function, they may be used together, unless otherwise indicated, or they may be used as alternates to one another. Functions designated "optional" are not necessarily required for every design. Insulation thicknesses and/or layers indicated below are minimum.
Note: When Rubadue or Furukawa wire listed in this table are used to produce a winding, no additional ground or interwinding insulation is required to separate this winding from other enameled magnet wire windings or between this winding and grounded or dead metal.
Winding Wire
- Recognized Component - Magnet wire (OBMW2), single build or greater, round or rectangular, copper or aluminum unless stated otherwise for the types listed below
- Recognized Component - Single and Multi-Layer Insulated Winding Wire (OBJT2) listed below
- Recognized Component - Appliance Wiring Material (AVLV2) listed below
- Bare conductors wrapped or interleaved with a paper or film listed below need not be a Recognized Component
(unless otherwise noted, winding wire types listed below may be used in combination within a single product)
MW 82 or 180C Polyurethane
MW 83 or 180C Polyurethane (Polyamide)
Furukawa
TEX-F
9 mils (0.23 mm) triple insulated
Rubadue Wire Co. Inc.
FEP wire
6 mils (0.15 mm) double or triple layer insulated
PFA wire
9 mils (0.23 mm) double or triple layer insulated
TCA2
4.5 mils (0.11 mm) doubled layer insulated
TCA3
4.5 mils (0.11 mm) double or triple layer insulated
Tefzel wire
4.5 mils (0.11 mm) double or triple layer insulated
Ground & Interwinding Insulations
Any Recognized Component Plastic (QMFZ2), polyethylene terphthalate film (PET) 3 mils (0.08 mm) - various manufacturers
Designation (no.)
mils(mm)
comments
Chang Chun
T355J
28 (0.71)
T375J
28 (0.71)
E. I. Dupont de Nemours & Co.
Nomex® 410
3 (0.08)
aramid insulating paper
Nomex® 411
7 (0.18)
aramid insulating paper
Nomex® 414
3 (0.08)
aramid insulating paper
Nomex® 418
3 (0.08)
aramid insulating paper
Kapton 100HA, 100PST
2 (0.05)
Kapton 100HN
2 (0.05)
Rynite 543
15 (0.38)
polyethylene terephthalate (PET)
Rynite FR943
15 (0.38)
polyethylene terephthalate (PET)
Hitachi Chemical
CP-J-8600
15 (0.38)
CP-J-8700
15 (0.38)
CP-J-8800
15 (0.38)
P. Leo
1H860
3 (0.08)
three wraps minimum
1P350
3 (0.08)
three wraps minimum
1P9FR
3 (0.08)
three wraps minimum
Sumitomo 3M Ltd
Super 10-T
3 (0.08)
Recognized Component - Insulating Tape (OANZ2) three wraps minimum
Super 10-W
3 (0.08)
Recognized Component - Insulating Tape (OANZ2) three wraps minimum
Taiwan Industries
DC2035
15 (0.38)
DC2038
15 (0.38)
DC3045
15 (0.38)
DC7550
15 (0.38)
Ticona
Zenite 6130L
15 (0.38)
LCP
Minor Sheet Insulations
layer, outer, wrap etc.
Any sheet insulation or tape described in this table with no minimum thickness requirement.
Cores, Tubes Bobbins
(optional)
for mechanical support only
Designation (no.)
comments
Chang Chun Plastics
PBT-3020
PBT-3030
PBT-4115
PBT-4130
T200NA
T210LA
T308J
T310
T33
T353
T355J
T357
T359J
T373J
T375J
T376J
T377J
T385J
T389
T614
E. I. Dupont de Nemours & Co.
Rynite 530
Rynite 530L
Rynite FR530
Rynite FR530L
Nan Ya
1400G3
1403G6
Sumitomo Bakelite
PM-9630
PM-9750
PM-9820
Sumitomo Chemical
E400(Y)L
E4000
E4008
E4008L
E400X
E4810
E5008
E5008L
E5010
E600(Y)L
E6000
E6008
E6008L
E600X
E6810
E7006L
E7810
Taiwan Ind. Dev. Crp.
DC1033
DC1035
DC1036
DC2035
DC2036
DC2037
DC2038
DC3045
DC3046
DC5010
DC5011
DC5012
DC7340
DC7550
Tapes
(optional)
Designation (no.)
comments
P.LEO & CO. LTD.
1A025
1G006
aramid fiber (Nomex) paper
1G016
1G027
rubber adhesive, glass cloth
1H818
reinforced PET, rubber adhesive
1H860
acrylic adhesive, polyester film
1H866
PET film with nonwoven polyester reinforcement fibers, acrylic adhesive
1K063
silicone adhesive, polyimide film
1N012
Aramid fiber (Nomex), Acrylic Adhesive
1P130
acrylic adhesive, polyester film
1P133
PET film, acrylic adhesive
1P135
PET film, acrylic adhesive
1P350
PET film, acrylic adhesive
1P9FR
Spacers and Wedges
Any material described in this table with no thickness requirement.
Sleevings
(optional)
Designation (no.)
comments
Cosmo Link
PTFE
Delfingen US, Inc. (Sofanou)
TFE
Furukawa
P1
Great Holding
TFL
TFS
TFT
Nikkan
S-693-F2
Zeus
FEP
TFE
Tie Cords
(optional)
Designation (no.)
comments
Various Manufacturers
Fiberglass, untreated
Varnishes
Recognized Component - Varnishes (OBOR2)
Designation (no.)
comments
Elantas Electrical Insulation Elantas Pdg Inc
80361, 80361FS, 80361FS-50
80831, 80831FC, 80831FC Black
8A5251C, 8A5251C-35, 8A5251C-45
C1525A, C1525F35, C1525G45
V1380, V1380FC, V1380FC Black, 80381FC
V1630FS, V1630, V1630FS50, V1630FS Black, 80361, 80361FS