System Component, Electrical Insulation - Component
E200050
P.LEO & CO. LTD.
4TH FL, UNIT 20-21 GOLDFIELD INDUSTRIAL CENTRE FO TAN, 1 SUI WO RD SHATIN N.T. HK
System
Component
System
Designation
System
Temp(Class)
2T-TFT.xx, 2T-TFL.xx, 1P801, 1P802, 1N012, 1G006, 1G015, 1G027, 1P130, 1H860, 1K063, 1H850, 1PK825, 1PN820, 1G155, 1G180, 1K7170, 1K7177, 1K7270, 1P700, 1P707, 1P717
F83
155(F)
Underwriters Laboratories Inc.
Construction Details
(Table I)
The use of this insulation system is limited to the combination of materials specified below. Where more than one item is designated under Insulation Function, they may be used together, unless otherwise indicated, or they may be used as alternates to one another. Functions designated "optional" are not necessarily required for every design. Insulation thicknesses and/or layers indicated below are minimum.
Note: When Rubadue wires are used to produce a winding, no additional ground or interwinding insulation is required to separate this winding from other enameled magnet wire windings or between this winding and grounded or dead metal.
Winding Wire
- Recognized Component - Magnet wire (OBMW2), single build or greater, round or rectangular, copper or aluminum unless stated otherwise for the types listed below
- Recognized Component - Single and Multi-Layer Insulated Winding Wire (OBJT2) listed below
- Recognized Component - Appliance Wiring Material (AVLV2) listed below
- Bare conductors wrapped or interleaved with a paper or film listed below need not be a Recognized Component
(unless otherwise noted, winding wire types listed below may be used in combination within a single product)
MW 30 or 180C Polyester-amide-imide
MW 35 or 200C Polyester-amide-imide (Polyamide-imide)
MW 73 or 200C Polyester-amide-imide (Polyamide-imide)
MW 74 or 200C Polyester-amide-imide
MW 76 or 180C Polyester-amide-imide (Polyamide)
MW 80 or 155C Polyurethane (Polyamide)
Bare Conductor - wapped with Nomex 410, 2 mils (0.051mm) min. 50% overlap.
Rubadue Wire Co. Inc.
FEP wire
4.5 mils (0.11 mm) double or triple layer insulated
TCA3
4.5 mils (0.11 mm) double or triple layer insulated
Tefzel wire
4.5 mils (0.11 mm) double or triple layer insulated
Ground & Interwinding Insulations
Any Recognized Component Plastic (QMFZ2), polyethylene terphthalate film (PET) 1 mils (0.03 mm) - various manufacturers
Designation (no.)
mils(mm)
comments
E. I. Dupont de Nemours & Co.
Nomex® 410
5 (0.13)
aramid insulating paper
Kapton 100H, 100HN
1 (0.03)
Kapton 100HA, 100PST
1 (0.03)
Rynite FR530
15 (0.38)
polyethylene terephthalate (PET)
Rynite FR530L
15 (0.38)
polyethylene terephthalate (PET)
P. Leo
1K063
1 (0.03)
Recognized Component - Insulating Tape (OANZ2)
1K7170
1 (0.03)
Recognized Component - Insulating Tape (OANZ2)
1K7177
1 (0.03)
Recognized Component - Insulating Tape (OANZ2)
1P801
1 (layers)
Recognized Component - Insulating Tape (OANZ2)
1P801H
2 (layers)
Recognized Component - Insulating Tape (OANZ2)
1P802
1 (layers)
Recognized Component - Insulating Tape (OANZ2)
1P802H
2 (layers)
Recognized Component - Insulating Tape (OANZ2)
Ticona
Zenite 6130
15 (0.38)
LCP
Zenite 7130
15 (0.38)
LCP
Lead Wires
(optional)
125 XLPE - chemically crosslinked polyethylene +
150 E/TFE - ethylene/tetraflouroethylene
150 EPDM - ethylene propylene diene monomer
150 FEP- florinated ethylene propylene
150 SI - silicone rubber - with or without glass braid
150 XLPE - chemically crosslinked polyethylene
200 FEP - florinated ethylene propylene
200 SI - silicone rubber - with or without glass braid
200 TFE - tetraflouroethylene
+ To be isolated from direct contact with windings (magnet wire) by any insulating material (tape, layer insulation, sleeving,etc.) listed in this table - unless specifically excluded from this requirement by a special note at the beginning of this table.
Minor Sheet Insulations
(optional)
layer, outer, wrap etc.
Designation (no.)
comments
3M
CeQuin 30F, 30F30, F30F
CeQuin 500
CeQuin GeSat
CeQuin IG, IGI, GIG
CeQuinbord CEL SAT
TufQuin 100, 110, 120
Dupont -Teijin Films
Mylar
E. I. Dupont de Nemours & Co.
Nomex
Various Manufacturers
Kraft Paper
Von Roll USA Inc. (Bedford Materials)
5JF
Memco 100 DMD
Pyroglas
Pyrolam 100X
Cores, Tubes Bobbins
(optional)
for mechanical support only
Designation (no.)
comments
Chang Chun Plastics
T373J
T375J
Chevron Phillips Chemical Co. LP
Ryton R-4
E. I. Dupont de Nemours & Co.
MX6130
Rynite FR530
Rynite FR530L
Zytel 101L
Zytel 103HSL
Zytel 70G30HSL
Zytel 70G33L
glass filled polyamide Type 66 nylon
Zytel FR50
Paramount Tube
ParaQuin
Rigid ParaQuin
RTP
RTP 205-FR
flame resistant nylon
RTP 205F
Sumitomo Bakelite
#E40582
PM-8375
PM-9630
PM-9750
PM-9820
PM-9830
Tapes
(optional)
Designation (no.)
comments
P.LEO & CO. LTD.
1G006
aramid fiber (Nomex) paper
1G015
silicone adhesive, glass cloth
1G027
rubber adhesive, glass cloth
1G155
glass cloth
1G180
glass cloth
1H850
polyester film
1H860
acrylic adhesive, polyester film
1K063
silicone adhesive, polyimide film
1K7170
Kapton film
1K7177
Kapton film
1K7270
Kapton film
1N012
Aramid fiber (Nomex), Acrylic Adhesive
1P130
acrylic adhesive, polyester film
1P700
polyester film
1P707
polyester film
1P717
polyester film
1PK825
polyester knit
1PN820
woven polyester cloth
Spacers and Wedges
(optional)
Designation (no.)
comments
Phillips Petroleum Co.
Ryton R-4 02 XT
Various Manufacturers
Wood, Untreated
Sleevings
(optional)
Designation (no.)
comments
Atkins & Pearce Inc.
Ben Har 1151-FR
Ben Har 1151-XL-200
silicone rubber coated fiberglass
Ben Har 1151-XL-240
Ben Har 1151-XL-FR-1
Ben Har Acryl
Ben Har Ex-Flex 1500
Suflex Acrylflex
Suflex Acrylflex VPI-NF
Suflex Flexicone
Suflex Silicone Resin
Suflex Silicone Resin HD
Suflex Silicone Rubber
Suflex Silicone Rubber HD
Suflex Silverflex T & D
1062
silicone rubber coated fiberglass
Atlantic Tubing
TFS
Delfingen US, Inc. (Sofanou)
Flexite PO-135 shrinkdown
Flexite TFE
Nu-Sleeve AG155-A (Polytube 463 A)
Nu-Sleeve AG155-B (Polytube 463 B)
Nu-Sleeve SG200 (SR 398)
Nu-Sleeve SG200-A (SR 398 H-A-1)
Great Holding
TFT
Hilec
Hilec 310
Hilec 410
Hilec 540
Hilec 710
Turbo 117F
P. Leo
2T-TFL.xx
teflon tube
2T-TFT.xx
teflon tube
Texloc
Light Wall
Standard
Thin Wall
Varflex
Varglas A397 acrylic
Varglas Non-Fray Type HM
Varglas Non-Fray Type HO
Varglas Silicone Resin 500
Varglas Silicone Rubber
Varglas Viton 231
Siflex
Silicone Rubber ES 4400 H-A-1
Varflo B-A-1
Tie Cords
(optional)
Designation (no.)
comments
American Efird Inc.
LP 1008
LP 1012
LP 1126
LP 1552
LP 1556
N884
Atkins & Pearce Inc.
13-220
16-2HT
17-200-NX
29-210
AP-3100-T
MS 9023-T4
Breyden Products
5070, 5100, 5200, 5311, 5312, 5313, 5350, 150, 225, 350
optional prefix of "G" or suffixes of "-1"
60, 75, 100, 200, 252, 330, 350, 390, 500, 504, 6100, 6200, 6500, 3MC, 5MC, 7MC
optional prefix of "HT" or suffixes of "-1" or "-LS"
Varflex
48
silicone coated fiberglass
Western Filament
50DOF17W
50NOF17W
DHS-1CL
Varnishes
(optional)
Recognized Component - Varnishes (OBOR2)
Designation (no.)
comments
Elantas Electrical Insulation Elantas Pdg Inc
468-2(x)
(x) - May be preceeded by prefix "E" and may be followed by a one to five alphanumeric suffix indicating percent of inert fillerand/or color. not valid for use with ANSI Type MW76 magnet wire.
C1525A, C1525F35, C1525G45
V1380, V1380FC, V1380FC Black, 80381FC
V1630FS, V1630, V1630FS50, V1630FS Black, 80361, 80361FS
John C. Dolph Co
AC-43, AC-43-66
BC-346A, BC-346-A, BC-346B, BC-346AN, BC-346-E
CC-1105, CC-1105HTC
not valid for use with ANSI Type MW76 magnet wire.
CC-1305, CC-1305/503D