System Component, Electrical Insulation - Component E200050  
P.LEO & CO. LTD.
4TH FL, UNIT 20-21 GOLDFIELD INDUSTRIAL CENTRE FO TAN, 1 SUI WO RD SHATIN N.T. HK
System
Component		 System
Designation		 System
Temp(Class)
1K7178, 1K7220, 1KPST, 1K7200, 1PS25, 1K063CR, 1K1CR, 1PEN2, 1PEN3, 1PN2R, 1PN3R, 1K7177, 1K063 B96 130(B)
Underwriters Laboratories Inc.

Construction Details (Table I)  

The use of this insulation system is limited to the combination of materials specified below. Where more than one item is designated under Insulation Function, they may be used together, unless otherwise indicated, or they may be used as alternates to one another. Functions designated "optional" are not necessarily required for every design. Insulation thicknesses and/or layers indicated below are minimum.
Note: Note: Insulated winding wires designated THL-F, THLX and THLY are suitable for use in this insulation system without additional ground or interwinding insulation
  Winding Wire - Recognized Component - Magnet wire (OBMW2), single build or greater, round or rectangular, copper or aluminum unless stated otherwise for the types listed below
- Recognized Component - Single and Multi-Layer Insulated Winding Wire (OBJT2) listed below
- Recognized Component - Appliance Wiring Material (AVLV2) listed below
- Bare conductors wrapped or interleaved with a paper or film listed below need not be a Recognized Component
(unless otherwise noted, winding wire types listed below may be used in combination within a single product)
MW 30 or 180C Polyesterimide
MW 35 or 200C polyester (polyamideimide)
MW 36 or 200C Polyester (Polyamide-imide)
MW 37 or 220C Polyester (Polyamide-imide)
MW 38 or 220C Polyester (Polyamide-imide)
MW 73 or 200C Polyester (Polyamideimide)
MW 74 or 200C Polyester-amide-imide
MW 76 or 180C Polyester (Polyamide)
MW 79 or 155C Polyurethane
MW 80 or 155C Polyurethane (Polyamide)
MW 82 or 180C Polyurethane
MW 83 or 180C Polyurethane (Polyamide)

Hoi Luen Electrical Mfr Co Ltd
     THL-F3.9 mils (0.1 mm)
     THLX3.9 mils (0.1 mm)
     THLY3.9 mils (0.1 mm)
Ground & Interwinding Insulations
     Designation (no.)mils(mm)comments
Dupont Teijin Films
     Teonex Q511 (0.03)PEN
E. I. Dupont de Nemours & Co.
     Kapton CR1 (0.03)
     Kapton HN1 (0.03)
     Rynite FR53015 (0.38)polyethylene terephthalate (PET)
     Zytel HTNFR52G30LX15 (0.38)
     Zytel NTNFR52G30NH15 (0.38)
P. Leo
     1K0631 (layers)Recognized Component - Insulating Tape (OANZ2)
     1K063CR1 (layers)
     1K1CR1 (layers)
     1K71771 (layers)Recognized Component - Insulating Tape (OANZ2)
     1K71781 (layers)
     1K72001 (layers)
     1K72201 (layers)Recognized Component - Insulating Tape (OANZ2)
     1KPST1 (layers)
     1PEN21 (layers)Recognized Component - Insulating Tape (OANZ2)
     1PEN31 (layers)Recognized Component - Insulating Tape (OANZ2)
     1PN2R1 (layers)Recognized Component - Insulating Tape (OANZ2)
     1PN3R1 (layers)Recognized Component - Insulating Tape (OANZ2)
     1PS251 (layers)
Sumitomo Bakelite
     Sumikon PM-963011.8 (0.3)Phenolic Molding Compound
     Sumikon PM-982011.8 (0.3)Phenolic Molding Compound
     E400815.7 (0.4)
Ticona
     Zenite 713011.8 (0.3)LCP
     Zenite 9140HT11.8 (0.3)

Minor Sheet Insulations(optional)layer, outer, wrap etc.
Any sheet insulation or tape described in this table with no minimum thickness requirement.
     Designation (no.)comments
E. I. Dupont de Nemours & Co.
     Nomex 410
     Nomex 411
     Nomex 414
     Nomex 418
     Nomex 424
     Nomex 425
     Nomex 992
     Nomex 993
     Nomex 994, Nomex 994 NPT
     Nomex E56A
     Press Board Paper
Cores, Tubes Bobbins(optional)for mechanical support only
     Designation (no.)comments
E. I. Dupont de Nemours & Co.
     Rynite FR330
     Rynite FR515
     Rynite FR530
     Zytel 70G30HSL
     Zytel 70G30L
     Zytel 70G33HS1L
     Zytel 70G33Lglass filled polyamide Type 66 nylon
     Zytel FR50
Tapes(optional)
     Designation (no.)comments
3M (Minnesota Mining & Mfg Co)
     1350## - replaced with suffix B-1, B-2, W-1, W-2, Y-1 and Y-2
P.LEO & CO. LTD.
     glass cloth 1G155
     polyester film 1P707
     1A025
     1C821cotton cloth
     1E075
     1E090
     1G006aramid fiber (Nomex) paper
     1G015silicone adhesive, glass cloth
     1G027rubber adhesive, glass cloth
     1G130glass cloth
     1G180glass cloth
     1G200woven glass cloth, silicone adhesive
     1G850
     1H818reinforced PET, rubber adhesive
     1H860acrylic adhesive, polyester film
     1H866PET film with nonwoven polyester reinforcement fibers, acrylic adhesive
     1H86A
     1H86R
     1K06A
     1K125
     1K220
     1K7170Kapton film
     1K7200
     1K7270Kapton film
     1KPST
     1M608
     1M860
     1M868
     1N008Aramid fiber (Nomex), Acrylic Adhesive
     1N012Aramid fiber (Nomex), Acrylic Adhesive
     1N155Aramid fiber (Nomex), Acrylic Adhesive
     1N410
     1P130acrylic adhesive, polyester film
     1P133PET film, acrylic adhesive
     1P316
     1P350PET film, acrylic adhesive
     1P656
     1P700polyester film
     1P701polyester film
     1P702polyester film
     1P703polyester film
     1P705polyester film
     1P717polyester film
     1P756
     1P801
     1P802
     1P802B
     1P830acrylic adhesive, polyester film
     1P833PET film, acrylic adhesive
     1P9FR
     1PFRS
     1PG880polyester film glass laminate
     1PG887polyester film glass laminate
     1PG888
     1PK825polyester knit
     1PN2R
     1PN820woven polyester cloth
     1PN828woven polyester cloth
     1PS016
     1PS025
     1PS050
     1TF05
     1TF07
     1TF08
     1TT02
   
Spacers and Wedges(optional)
 
     Designation (no.)comments
E. I. Dupont de Nemours & Co.
     Nomex Board
Sleevings(optional)
     Designation (no.)comments
P. Leo
     2R-SG
     2R300
     2R600
     2S1@@-xx.xxHeat Shrinkable
     2S1WH-xx.xxHeat Shrinkable
     2S2@@-xx.xxHeat Shrinkable
     2S2WH-xx.xxHeat Shrinkable
     2T-TFL.xxteflon tube
     2T-TFS.xxteflon tube
     2T-TFT.xxteflon tube
Sumitomo
     Sumitube F2
     Sumitube F32
Varnishes(optional)Recognized Component - Varnishes (OBOR2)
     Designation (no.)comments
Elantas Electrical Insulation Elantas Pdg Inc
     434 Air Dry Only suitable for use with Polyester Basecoat Magnet Wire types MW 30, MW 76, MW 35, MW 36, MW 73, MW 74 and MW 37
     87V-456, 77X-010, 77X-010B
     Isonel 31-398, 32RF, 31-863, 31-863X, 30 Only suitable for use with Polyester Basecoat Magnet Wire types MW 30, MW 76, MW 35, MW 36, MW 73, MW 74 and MW 37
Potting Compounds(optional)
     Designation (no.)comments
Dow Corning
     SE9188
     SE9188S
Elantas Electrical Insulation Elantas Pdg Inc
     471-5LL
Shin Etsu
     KE402