OBJS2  System Component, Electrical Insulation - Component E200050  
P LEO & CO (B C) LTD
PO BOX 94250 RICHMOND BC V6Y 2A6 CA
System
Component		 System
Designation		 System
Temp(Class)
1P9FR, 1A025, 1H86A, 1H86R, 2T-TFT.xx, 2T-TFL.xx, 1A025WH, 1M868, 1PLEO, 1P001, 1P007, NTN Series, TK Series, TP Series, TPT Series, 1G006, 1G015, 1G027, 1P130, 1H860, 1K063, 1C821, 1PG880, 1PG887, 1H850, 1PK825, 1PN820, 1PN828, 1G130, 1G155, 1G180, 1K7170, 1K7177, 1K7270, 1P700, 1P702, 1P705, 1P703, 1P707, 1P717, 1P751, 1P808, 1P800, 1P801, 1P802, 1P830, 1P135, 1H818, 1P701 B83 130(B)
Copyright © 2006 Underwriters Laboratories Inc.

Construction Details (Table I) alternate constructions 

The use of this insulation system is limited to the combination of materials specified below. Where more than one item is designated under Insulation Function, they may be used together, unless otherwise indicated, or they may be used as alternates to one another. Functions designated "optional" are not necessarily required for every design. Insulation thicknesses and/or layers indicated below are minimum.


  Winding Wire - Recognized Component - Magnet wire (OBMW2), single build or greater, round or rectangular  listed below or
- Recognized Component - Single and Multi-Layer Insulated Winding Wire (OBJT2) listed below or
- Recognized Component - Appliance Wiring Material (AVLV2) listed below
(unless otherwise noted, winding wire types listed below may be used in combination within a single product)
MW 28 and 130C Polyurethane (Polyamide)
MW 30 or 180C Polyester-amide-imide
MW 35 or 200C Polyester-amide-imide (Polyamide-imide)
MW 73 or 200C Polyester-amide-imide (Polyamide-imide)
MW 74 or 200C Polyester-amide-imide
MW 75 or 130C Polyurethane
MW 76 or 180C Polyester-amide-imide (Polyamide)
MW 79 or 155C Polyurethane
MW 80 or 155C Polyurethane (Polyamide)
Bare Conductor - insulated with any Nomex Gound insulation in this table, 2 mils (0.051mm), 50% overlap


  Ground & Interwinding Insulations

     Designation (no.) mils(mm) comments
3M (Minnesota Mining & Mfg Co)
     1 5 (layers) Recognized Component - Insulating Tape (OANZ2)
     1298 5 (layers) Recognized Component - Insulating Tape (OANZ2)
     1318 5 (layers) Recognized Component - Insulating Tape (OANZ2)
     1339 5 (layers) Recognized Component - Insulating Tape (OANZ2)
     1350 5 (layers) Recognized Component - Insulating Tape (OANZ2)
     44 5 (layers) Recognized Component - Insulating Tape (OANZ2)
     5 5 (layers) Recognized Component - Insulating Tape (OANZ2)
     56 5 (layers) Recognized Component - Insulating Tape (OANZ2)
     57 3 (layers) Recognized Component - Insulating Tape (OANZ2)
Dupont Teijin Films
     Mylar 5 (0.13) polyethylene terephthalate film (PET)
E. I. Dupont de Nemours & Co.
     Nomex 410 5 (0.13) aramid insulating paper
     Nomex 411 11.5 (0.29) aramid insulating paper
     Nomex 414 5 (0.13) aramid insulating paper
     Nomex 418 5 (0.13) aramid insulating paper
     Nomex 424 5 (0.13) aramid insulating paper
     Nomex 425 5 (0.13) aramid insulating paper
     Nomex 992 10 (0.25) aramid insulating paper
     Nomex 993 8.25 (0.21) aramid insulating paper
     Nomex 994 8.25 (0.21) aramid insulating paper
     Nomex E56A 7.5 (0.19) aramid insulating paper
     Zytel 101L 28 (0.71)
     Zytel 103HSL 28 (0.71)
     Zytel 70G13L 28 (0.71)
     Zytel 70G30HSL
     Zytel 70G33HS1L 28 (0.71)
     Zytel 70G33L 28 (0.71) polyamide 66
     Zytel FR50 28 (0.71) polyamide 66
P. Leo
     1P801 5 (layers) Recognized Component - Insulating Tape (OANZ2)
     1P802 5 (layers) Recognized Component - Insulating Tape (OANZ2)

  Lead Wires (optional)

125 EPDM - ethylene propylene diene monomer
125 XLPE - chemically crosslinked polyethylene
125 XLPE - irradiated crosslinked polyethylene
125 XLPVC - crosslinked polyvinylchloride
150 EPDM - ethylene propylene diene monomer
150 SI - silicone rubber - with or without glass braid
150 XLPE - chemically crosslinked polyethylene
150 XLPE - irradiated crosslinked polyethylene
200 PTFE - polytetrafluoroethylene
200 SI - silicone rubber - with or without glass braid


  Minor Sheet Insulations (optional) layer, outer, wrap etc.
Any sheet insulation or tape described in this table with no minimum thickness requirement.
     Designation (no.) comments
Cotrell Paper Co Inc.
     Copaco 125
Dennison
     Kraft Paper
Kimberly Clark
     Kraft Paper
Miki Tokusys Paper mfg.
     PB-2 press board paper
Mosinee
     Kraft Paper
P. Leo
     NTN Series
     TK Series
     TP Series
     TPT Series
Pilcher Hamilton
     Gummed Kraft Paper
     Kraft Paper
Protectolite
     1030HT
Riegel Products (James River)
     Glassine Paper
     Kraft Paper
Spaulding
     Spaulding L paper, 50% rag
Various Manufacturers
     Polyethylene terephthalate film (PET) Recognized Component Plastics (QMFZ2)
Von Roll Isola (Acme)
     Varnish Cambric
Windsor-Stevens Inc.
     Kraft Paper

  Cores, Tube, Bobbins (optional) (for mechanical support only)

     Designation (no.) comments
Chang Chun Plastics
     PBT-4130
     T200NA
     T210LA
     T308J
     T310
     T33
     T353
     T355J
     T357
     T359J
     T373J
     T375J
     T376J
     T377J
     T385J
     T389
     T614
Paramount Tube
     ParaQuin
     ParaQuin F
     Paratherm
     Phenolic Kraft
     Rigid ParaQuin
     Rigid ParaQuin F
     Rigid Paratherm
Precision Paper Tube Co.
     Cellulose Acetate
     Dielectric Kraft
     FR9000
     Heat-Shrink Mylar
     Mylar
     Pyroform 310
     Pyroform 330
     Resinite 8108
     Resinite 8111
     Resinite 8717
     Resinite 9120
     Resinite 9120-1
     Thermoform 1000 Kapton film with amide-imide binder
     Thermoform 255
     Thermoform 700
     Thin Wall P-100
     Thin Wall P-30
     Thin Wall P-60
     Vulcanized Fiber

 
    Tapes (optional) 

     Designation (no.) comments
P Leo & Co (B C) Ltd
     1A025
     1A025WH
     1C821 cotton cloth
     1G006 aramid fiber (Nomex) paper
     1G015 silicone adhesive, glass cloth
     1G027 rubber adhesive, glass cloth
     1G130 glass cloth
     1G155 glass cloth
     1G180 glass cloth
     1H818 reinforced PET, rubber adhesive
     1H850 polyester film
     1H860 acrylic adhesive, polyester film
     1H86A
     1H86R
     1K063 silicone adhesive, polyimide film
     1K7170 Kapton film
     1K7177 Kapton film
     1K7270 Kapton film
     1M868
     1P001
     1P007
     1P130 acrylic adhesive, polyester film
     1P135 PET film, acrylic adhesive
     1P700 polyester film
     1P701 polyester film
     1P702 polyester film
     1P703 polyester film
     1P705 polyester film
     1P707 polyester film
     1P717 polyester film
     1P751 polyester film
     1P800 polyester film
     1P801 acrylic adhesive, polyester film
     1P802 acrylic adhesive, polyester film
     1P808 polyester film
     1P830 acrylic adhesive, polyester film
     1P9FR
     1PG880 polyester film glass laminate
     1PG887 polyester film glass laminate
     1PK825 polyester knit
     1PLEO
     1PN820 woven polyester cloth
     1PN828 woven polyester cloth

 
  Spacers and Wedges (optional) 
Any material described in this table with no thickness requirement.
     Designation (no.) comments
Glastic Corp.
     1580
     1583
     FHT
     MTS
     SG-200
     TSF polyester/glass
     UTS
Haysite
     EHC glass reinforced thermosetting polyester
     EHG-S
     EMD
     ETS NRMA GPO-1 130
     ETS-FR-II
     HST-II glass reinforced thermosetting polyester
Nohl
     APO-1
     APO-2
     APO-3
Resolite
     Polyglas 109
     Supersil Polyglas
Technical Pultrusions
     Glass Polyester Poltruded Rod
Various Manufacturers
     Maple, Untreated
     Pine, Untreated

  Sleevings (optional) 

     Designation (no.) comments
Federal Mogul (Bently Harris)
     1062 silicone rubber coated fiberglass
     Ben Har 1151-FR
     Ben Har 1151-XL-200 silicone rubber coated fiberglass
     Ben Har 1151-XL-220
     Ben Har 1151-XL-240
     Ben Har Acryl
     Ben Har Ex Flex (std)
     Ben Har Ex-Flex 1500
     Ben Har ST (std)
     Ben Har ST-1250
     Vinylglass
Goldstar Cable
     GSHS-1605
     GSHS-1625
Hilec (Brand Rex, Voltube)
     HT
     HTS
     Hilec Series 200
     Hilec Series 300
     Hilec Series 400
     Hilec Series 500
     Hilec Series 600
     Hilec Series 700
     Hilec Series 800
     Turbo 117E
     Turbo 117F
     Turbo 117G
     Turbo 117U
     Turbo TUF
     Turbocryl
     Vol-Cryl
     Vol-Flex
     Vol-Glas
     Vol-Glas P
     Vol-Sil
Hitachi
     Heat Shrink Tube M2
Kurabe
     HG-20E
Natvar
     Acryliglas
     Natglas
     Natglas T & D
     Natvar 400/461
     Silicone Rubber Coated Fiberglass
     Vinyl coated fiberglass
Nichias
     9003-150@
     9003-300@
     9003-60@
Nitto Denko
     1225
P. Leo
     2T-TFL.xx teflon tube
     2T-TFT.xx teflon tube
Raychem Corp.
     Thermofit RNF-100
Remtek
     CFR-125
Sofanou (Jenisco)
     AW 751
Suflex (Essex)
     Suflex Acrylflex VPI
     Astratite 703/105
     Extendo
     Suflex Flexicone 200
     Silverflex
     Suflex Vinylglas
Sumitomo
     Sumitube F2
Varflex
     Varglas 343 acrylic F-A-1
     Varglas A397 F-A-1
     Varglas A397 F-C-1
     Varglas Non-Fray Type H
     Varglas Non-Fray Type HM
     Varglas Non-Fray Type HO
     Varglas Non-Fray Type HP
     Varglas S1600
     Siflex
     Varglas Silicone Resin A
     Varglas Silicone Rubber ES 4400
     Silicone Rubber H-A-1
     Silicone Rubber H-C-1
     Silicone Rubber H-C-2
     Varflo B-A-1
     Varflo B-C-1
     Varglas Viton 231
Various Manufacturers
     Untreated Fiberglass
Zeus
     TFE-LW
     TFE-SW
     TFE-TW

  Tie Cords

     Designation (no.) comments
Varflex
     Fiberglass, Untreated

  Potting Compounds (optional)

     Designation (no.) comments
Epoxylite Corp.
     EIP 4609
Ripley Resin Engineering Co Inc
     471-5LL
     6655 Series
     6655-9
     C-100
     C-100-L1M

  Potting Shells (optional)

     Designation (no.) comments
Various Manufacturers
     Any moldable material in this table

  Varnishes (optional) Recognized Component - Varnishes (OBOR2)

     Designation (no.) comments
Ripley Resin Engineering Co Inc
     468-2-(+) (+) may be followed by a two or three character suffix indicating % inert filler or color.
     468-2-7(++) (++) may be followed by a one or two character suffix indicating % inert filler or color.
     468-2FC(+) (+) may be followed by a two or three character suffix indicating % inert filler or color.

NOTICE : This information , based upont UL Testing Guidelines and our experience, is offered without charge by P. Leo as part of our service to customers. It is intended for persons having technical skill to use at their own discretion and risk. We do not guarantee favorable results, and the P. Leo & Co., (B.C.) Ltd. assumes no obligation or liability for any advice furnished or for any results obtained to operae under, or a recommendation to infringe upon, any patent of P. Leo or others. Compliance with applicable government codes is also the responsibility of the user.

® Registered trademark of Underwriters Laboratories, Inc.

Copyright © 1996-2007 P. Leo & Co., Ltd.

All rights reserved. Reproduction in whole or in part in any form or medium without express written permission of P. Leo & Co., Ltd. is prohibited.
BCwire ; pBobbin ; BCmica; BCtube are trademarks of P. Leo & Co.(B.C.), Ltd.

Zytel ® Rynite ® Zenite® Kapton ® Kaladex ® Mylar ® and Nomex ® are Du Pont trade marks.